- Brand : Tripp Lite
- Product name : B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA
- Product code : B160-201-HSI
- GTIN (EAN/UPC) : 0037332196811
- Category : AV Extenders
- Data-sheet quality : created/standardized by Icecat
- Product views : 90587
- Info modified on : 11 Aug 2024 07:46:33
- Product Brochure/Datasheet (0.2 MB)
-
Bullet Points Tripp Lite B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA
:
- - Units connect point-to-point without a switch up to 328.08-ft. (100 m)
- - Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
- - Dual HDMI outputs on receiver for connecting 2 displays
- - Plug and play—no software or drivers required
- Warranty: : 1-year limited
-
Long product name Tripp Lite B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA
:
HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA
-
Tripp Lite B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA
:
The B160-201-HSI 2-Port HDMI over IP Transmitter/Receiver/Extender Kit extends and distributes HDMI audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328.08-ft. (100 m) away, which is more than 200-ft. (60.96 m) farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite's NG5, you can continue extending the distance between source and display up to 328.08-ft. (100 m) per switch. Two HDMI outputs on the receiver allow the connection of two displays.
Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by including dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite's NSS-G16D2. With a compatible B160-Series receiver, you can send the HDMI video source to any analog or digital display, including VGA and DisplayPort™, allowing you to mix and match technologies and use existing monitors. The IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.
The B160-201-HSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz in a point-to-multipoint switch installation. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps. The transmitter and receiver units mount to a wall, rack or pole using the including hardware.
*Unmanaged switch installations are limited to two transmitter units. The number of receivers is limited to the number of ports remaining on an unmanaged switch.
**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
Extends and Distributes HDMI A/V, Serial and IR Control Signals over Cat5/6 Cabling
Converts audio/video to an IP-based signal that is transmitted point-to-point to a display 328.08-ft. (100 m) away
Add low-cost network switches between transmitter and receiver to continue extending distance up to 328.08-ft. (100 m) per switch
Dual HDMI outputs on receiver for connecting 2 displays
HDMI output on transmitter for connecting a local display
Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers
Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches
IGMP-enabled switches allow centralized control over which sources show on which displays
Video source can be sent to any analog or digital display, so you can mix and match technologies and use existing monitors
Enhanced Technical Features
Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
Uses H.264 video compression standard
Transmits on 20-60 kHz IR frequency
Extends IR control signals that control a source from a remote display
Supports RS-232 serial baud rates up to 57600 Bps
HDCP and 3D compatible
Plug-and-Play Functionality
No software or drivers required
Hardware included for mounting on wall, rack or pole
TAA-Compliant
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases -
Short summary description Tripp Lite B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA
:
Tripp Lite B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA, 1920 x 1080 pixels, AV transmitter & receiver, 200 m, 3D, Black, HDCP
-
Long summary description Tripp Lite B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA
:
Tripp Lite B160-201-HSI HDMI over IP Extender Kit with Built-in 2-Port Splitter, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA. Type: AV transmitter & receiver, Maximum resolution: 1920 x 1080 pixels, Maximum transfer distance: 200 m. AC input voltage: 100-240 V, AC input frequency: 50 - 60 Hz, Operating voltage: 5 V. Package width: 342.9 mm, Package depth: 149.9 mm, Package height: 83.8 mm. Cables included: AC, Audio (3.5mm), IR. Master (outer) case width: 439.4 mm, Master (outer) case length: 363.2 mm, Master (outer) case height: 325.1 mm
This browser does not support the video element.
Features | |
---|---|
Type | AV transmitter & receiver |
Maximum resolution | 1920 x 1080 pixels |
Maximum transfer distance | 200 m |
Maximum refresh rate | 60 Hz |
LED indicators | |
Supported video modes | 480i, 480p, 720p, 1080i, 1080p |
Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1440 x 900, 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080) |
Video compression formats | H.264 |
HDCP | |
3D | |
Product colour | Black |
Ports & interfaces | |
---|---|
RJ-45 input ports | 1 |
RJ-45 output ports | 1 |
HDMI in | 2 |
Number of HDMI outputs | 2 |
RS-232 input ports | 1 |
Power | |
---|---|
AC input voltage | 100-240 V |
AC input frequency | 50 - 60 Hz |
Operating voltage | 5 V |
Input current | 0.5 A |
Power | |
---|---|
Output current | 2 A |
External power adapter |
Packaging data | |
---|---|
Package width | 342.9 mm |
Package depth | 149.9 mm |
Package height | 83.8 mm |
Package weight | 1.54 kg |
Packaging content | |
---|---|
Cables included | AC, Audio (3.5mm), IR |
Manual | |
Mounting brackets included |
Technical details | |
---|---|
Country of origin | Taiwan |
Compliance certificates | RoHS |
Logistics data | |
---|---|
Master (outer) case width | 439.4 mm |
Master (outer) case length | 363.2 mm |
Master (outer) case height | 325.1 mm |
Master (outer) case gross weight | 15.9 kg |
Products per master (outer) case | 10 pc(s) |
Master (outer) case GTIN (EAN/UPC) | 20037332196815 |
Country | Distributor |
---|---|
|
2 distributor(s) |
|
1 distributor(s) |